Operation - Record; Continuous Recording - Vitek VT-H41 Manual

VT-H41

3. OPERATION - RECORD

The system has 6 recoding modes.
CONTINUOUS recording – Recording continuously when the DVR is turned on.
C icon is displayed on the screen.
MOTION DETECTION recording – Recording when the DVR detects motion form input video.
M icon is displayed on the screen.
SENSOR recording – Recording when the external sensor of DVR is set off.
S icon is displayed on the screen.
SCHEDULE recording – Recording according to the schedule setting.
None – No recording
Manual recording by REC button – Recording when the REC button of DVR is pressed.
R icon is displayed on the screen.

3-1. CONTINUOUS recording

CONTINUOUS recoding setting is available for each channel. The DVR records automatically
input video in CONTINUOUS recording mode as a factory default, unless RECORDING mode is
changed.
Set the basic record menu using
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
Upon connecting cameras, the DVR records input video displaying C on the screen.
To stop CONTINUOUS recording, go to RECORDING BY filed using
using button.
(Refer to page 25)
(Refer to page 25)
(Refer to page 28)
(Refer to page 29)
buttons before setting Motion detection.
21
(Refer to page 30)
button and select NONE