Kodak DirectView CR 800 System Theory Manual page 6

Illustration: Remote Operations Panel
With HANDHELD BARCODE READER
1–6
Kodak DirectView REMOTE OPERATIONS PANEL (ROP)
A REMOTE OPERATIONS PANEL (ROP) is a separate device that can be
attached to the wall at a location remote from any CR 800. It allows users to:
• Enter patient, exam, and CASSETTE data into a remotely located CR 800
using an attached BARCODE READER and a TOUCH SCREEN with a
virtual keyboard.
• Access patient demographic data from the site's HIS/RIS via DICOM
Worklist Management.
• View scanned images remotely and perform QA on the images.
• Manually route images to various destinations.
A ROP can be dedicated to a single CR 800, multiple ROPs to a single CR 800
or multiple ROPs to multiple CR 800s in a cluster. PEC information entered
through a ROP and distributed across the network can be associated with the
proper image regardless of where the image is scanned.
A ROP consists of a dedicated compact PC computer with standard operating
system software, running a standard internet browse. The TOUCHSCREEN
MONITOR is an SVGA device with a 600 x 800 pixel resolution.
The BARCODE READER is capable of reading all formats identified for the
HAND-HELD BARCODE READER on the CR 800 unit.
12/12/94 – 1234563