Toro MultiPro 1750 Operator's Manual page 66

Figure 75
1. Bypass fitting
Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (Figure 76B).
Figure 76
1. Valve open
2. Remove the 2 end-cap-fitting assemblies from
each end of the manifold body
Figure 78).
g028239
2. Section-valve manifold
g027562
2. Valve closed
(Figure 77 and
Agitation Valve Manifold
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem-capture retainer
5. End-cap fitting
6. End-cap seal O-ring
(0.796 x 0.139 inch)
66
Figure 77
7. Back seating O-ring (0.676
x 0.07 inch)
8. Valve-seat ring
9. Manifold body
10. Ball valve
11. End-cap-fitting assembly
g028243