Toro MultiPro 1750 Operator's Manual page 19

first screen of the InfoCenter. The hour meter starts
to function whenever the key is turned to the R
position.
Foam-Marker Switch Locations
(Optional)
If you install the Foam Marker kit, you will add switches
to the control panel for controlling their operation. The
sprayer comes with plastic plugs in these locations.
Regulating (Rate-Control) Valve
This valve, located behind the tank
controls the amount of fluid routed to the sections or
the rate return to the tank.
Figure 10
1. Regulating (rate-control)
valve
2. Agitation valve
3. Master section valve
Master-Section Valve
The master-section valve
to the flow meter and section valves.
Flow meter
The flow meter measures the flow rate of the fluid for
use by the InfoCenter system
Section Bypass Valves
These valves turn the right, center, and left sections
on or off (Figure 10).
UN
(Figure 10),
4. Flow meter
5. Section valves
(Figure 10) controls the flow
(Figure 10).
Section-Bypass Shutoff Valve
The section bypass shutoff valve redirects the fluid
flow for a section to the tank when you turn off the
section. You can adjust the section bypass to ensure
that the section pressure remains constant no matter
how many sections are on. Refer to
Section Bypass Valves (page
Agitation Valve
This valve is located on the rear of the tank
10). When agitation is on, the flow is directed through
the agitation nozzles in the tank. When agitation is off,
the flow is directed through the pump suction.
Pressure Gauge
The pressure gauge is located on the control panel
(Figure 7). This gauge shows the pressure of the fluid
in the system in psi and kPa.
InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine and battery pack, such as the current
battery charge, the speed, diagnostics information,
and more (Figure
For more information, refer to the Multi Pro 1750
Software Guide.
Agitation-Throttle Valve
g204247
The agitation-throttle valve is used to reduce the flow
available for the agitation circuit. It provides additional
flow for the sections.
19
Adjusting the
29).
7).
(Figure