AirSep FreeStyle Manual page 241

FreeStyle™
Use with DC Power (Automobile, Motorboat etc.)
Caution: When using FreeStyle with the universal power supply in an automobile,
boat, or other motor vehicle, make sure that the vehicle is started and running
before turning on and operating the FreeStyle unit. If the power supply indicator
light does not illuminate and requires resetting, disconnect the power supply from
the motor vehicle's DC outlet, restart your vehicle, and then reconnect your power
supply into the DC outlet.
1. Make sure your power supply is securely connected to the FreeStyle inlet,
as shown in Figure 14.
2. Connect the proper DC power cord end to the inlet marked ACCESSORY
DC IN on the power supply, as shown in Figure 17.
3. Turn on your motor vehicle.
4. Connect the DC power cord to the motor vehicle's DC outlet, as shown in
Figure 18.
5. To operate the POC, press the FreeStyle [1], [2], or [3] setting on the unit's
top panel, as determined by your prescription. To turn the unit off, press the
setting associated with the LED illuminated above it.
MN131-1 F
Figure 17
Figure 18
EN
EN-25