AirSep FreeStyle Manual page 240

EN
Use with AC Electric
1. Make sure your power supply is securely connected to the FreeStyle inlet,
as shown in Figure 14.
2. Connect the proper end of the AC electrical cord to the unmarked AC inlet
on the power supply, as shown in Figure 15.
3. Connect the opposite end of the AC electrical cord to the wall or other
appropriate electric outlet, as shown in Figure 16.
4. To operate the POC, press the FreeStyle [1], [2], or [3] setting on the unit's
top panel, as determined by your prescription.
To turn the unit off, press the setting associated with the LED illuminated
above it.
EN-24
Figure 15
Figure 16
FreeStyle™
MN131-1 F