Normal Operation - LEAB Champ 1207 User Manual

Installation instructions
Connection to 230 V mains
To install the device to the 230 V mains, perform the following step:
The charger is only suitable for connection to fused, earthed 230
V mains supplies.
1. Connect the mains plug to a 230 V mains supply.
The charger is connected to the 230 V mains supply.
9

Normal operation

Charging the battery
To unpack the device, perform the following steps:

The device is installed.

The battery is connected.
1. Connect the mains plug to a 230 V mains supply.

Charging starts automatically, the yellow LED of the charge status
indicator lights up.

If the charging current is 15% below the maximum value, the
yellow and green LEDs of the charging status indicator light up.

When the battery is fully charged, the green LED on the charging
status indicator lights up and indicates the trickle charge.
The battery is charged.
Temperature sensor
Depending on the model, the LEAB Champ has 2 robust, moulded ring cable
lugs on both charging cables for connection to the battery. The black
negative lead is followed by the temperature sensor, which is why the lead
must not be shortened or extended.
The temperature sensor corrects the charging voltage as a function of the
temperature in order to provide an optimal, effective and gentle battery
charge.
Page 16 of 18
Normal operation