Environmental Specifications; Uninterruptible Power Supply (Ups) - Avid Technology ISIS File Gateway Setup And User Manual

A Dimensions and Weights

Environmental Specifications

The following table provides information on operating and storage temperature, and
humidity specifications for the Avid hardware components. Make sure your environment
meets the narrowest range of specifications in the table.
Environmental Specifications
Component
1U File Gateway server 32°F to 104°F

Uninterruptible Power Supply (UPS)

Avid highly recommends you create a separate derived power system for your ISIS File
Gateway. This provides protection against sudden power surges or losses that could cause
you to lose files or experience data corruption.The power outlets need to be from the same
distribution panel. This helps prevent ground loops that can be caused by plugging
equipment into power sources with different ground potentials. Make sure there is adequate,
dedicated power for the UPSes.
w
You should have all the electrical work at your site done by a licensed electrician. The
electrical changes must meet country, state, and local electrical codes.
The ISIS File Gateway supports UPS devices that are connected using network connections,
USB connections, and serial connections. Install the software from the UPS manufacturer
for advanced shutdown behavior, calibrate the UPS device. These software packages also
allow for a connected Windows server to send alerts to other Windows servers to perform
actions.
If your ISIS File Gateway is connected to a network, network policy settings might also
prevent you from completing this procedure. Make sure there is adequate power and the
correct receptacle type for each hardware component, the rack power strips, and the UPSes.
Do not use extension cords to plug in any of the hardware components.
74
Operating
Temperature
(0°C to 40°C)
Operating
Humidity
5% to 95% (at 38°C)
non-condensing
Storage
Temperature
–4°F to 140°F
(–20°C to 60°C)