4.2.2
Accessing the Web Page via Web Browser
Once the device is installed and connected, power on the device. The following infor-
mation guides you through the logging in process.
1.
Launch your web browser on the PC.
2.
In the browser's address bar, type the device's default IP address (Eth1:
192.168.0.1, Eth2: 192.168.1.1).
The main interface displays.
4.2.3
Changing Default Password
In keeping with good management and security practices, it is recommended that
you change the default password as soon as the device is functioning and setup
correctly. The following details indicate the necessary steps to change the default
password.
To change the password:
1.
Navigate to System Management > Administration.
2.
In the Password field, type in the new password. Re-type the same password in
the Confirmation field.
3.
Click Apply to change the current settings.
Figure 4.2 Changing a Default Password
42
EKI-122xR-CE Series User Manual