Figure 4.9 Port Configuration > Port > Operation - Advantech EKI-1222R-CE User Manual

4.7.2.2 Operation
To access this page, click Port Configuration > Port > Operation.
The following table describes the items in the previous figure.
Item
Mode
Protocol
Slave Timeout(ms)
Peer for Receiving Data
Peer Number
Apply
Figure 4.9 Port Configuration > Port > Operation
Description
Click the drop-down menu to select the port configuration mode:
Modbus Slave Mode.
Select the protocol of the Slave Mode or Master Mode (RTU or
ASCII).
Specify the time duration in milliseconds for the EKI-122xR-CE Series
to wait for a response after it has issued a command while using
Modbus/RTU or Modbus ASCII. After the timeout is expired and no
response is received, the EKI-122xR-CE Series will regard the
command as failed. Note that the timeout for the host PC must be
greater than the timeout setting here specified, otherwise an error will
occur.
Click the drop-down menu to select the number of network device
which you want to connect.
Click Apply to save the values and update the screen.
48 EKI-122xR-CE Series User Manual