Table of Contents
Advertisement
Item
Restore Backup
Flash new firmware image
Image
4.15.3
System
To access this page, click Management > System.
The following table describes the items in the previous figure.
Item
System
Local Time
Hostname
Timezone
NTP Setting
NTP
Provide NTP Server Click the radio button to enable or disable the provide the NTP server.
NTP Server
Candidates
Apply
Description
Click Browse to select the configuration file and click Upload Archive
to restore configuration to the device.
Click Browse to select the firmware file and click Flash image to
upgrade the firmware.
Figure 4.24 Management > System
Description
Displays the current time. Click Sync with browser and synchronize
the time on the device with the local PC.
Enter the device name: up to 31 alphanumeric characters.
Click the drop-down menu to select a system time zone.
Click the radio button to enable or disable the NTP.
Enter the address of the NTP server. This is a text string of up to 64
characters containing the encoded unicast IP address or hostname of
a NTP server. Unicast NTP requests will be sent to this address. If this
address is a DNS hostname, then that hostname should be resolved
into an IP address each time a NTP request is sent to it.
Click Apply to save the values and update the screen.
58
EKI-122xR-CE Series User Manual
Advertisement
Table of Contents
