4.7.2
Port
4.7.2.1
Basic
To access this page, click Port Configuration > Port > Basic.
The following table describes the items in the previous figure.
Item
Type
Baud Rate
Parity
Data Bits
Stop Bits
Flow Control
Apply
EKI-122xR-CE Series User Manual
Figure 4.8 Port Configuration > Port > Basic
Description
Click the drop-down menu to select a serial interface: RS232, RS422
or RS485.
Click the drop-down menu to select a value to specify the baud rate.
The value should conform to the current transmission speeds of
connected devices when setting the baud rate.
Click the drop-down menu to select the parity: None, Odd, Even, Mark
or Space.
Click the drop-down menu to select the data bits: 5, 6, 7, or 8.
Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Click the drop-down menu to select the flow control mode: None,
XOn/XOff or RTS/CTS.
Click Apply to save the values and update the screen.
47