Table of Contents
Advertisement
1 Installation
This cooker has class "2/1" overheating protection so that it can be
installed next to a cabinet.
If the cooker is installed adjacent to furniture which is higher than the gas
hob cooktop, a gap of at least 200 mm must be left between the side of
the cooker and the furniture.
The walls and kitchen furniture surrounding the appliance must be made
of non-flammable material. The veneered synthetical material and the glue
used must be resistant to a temperature of 90°C in order to avoid ungluing
or deformations. It is recommended that a 10 mm gap to each side is made
if the adjacent kitchen furniture is made of a plastic laminate wrap.
Curtains must not be fitted immediately behind appliance or within
500 mm of the sides.
It is essential that the cooker is positioned as stated below.
We do not recommend the cooker is located on a plinth. If this is
unavoidable, it will be necessary to provide safety measures to prevent the
appliance falling off.
The cooker must be installed by a suitably qualified technician and in
compliance with local safety standards.
Fig. 1.1
9
Advertisement
Table of Contents
