Table of Contents
Advertisement
Anti-tilt bracket
Important!
To restrain the appliance and prevent it tipping accidentally, fit a bracket
to its rear to fix it securely to the wall.
To fit the anti-tilt bracket:
1. After you have located where the cooker is to be positioned, mark on the
wall the placewhere the two screws of the anti-tilt bracket have to be fitted.
2. Please follow the indications given in fig. 1.11.
3. Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied.
Important!
Before drilling the holes, check that you will not damage any pipes or
electricalwires.
4. Loosely attach the anti-tilt bracket with the two screws supplied.
5. Move the cooker to the wall and adjust the height of the anti-tilt bracket so
that it canengage in the slot on the cooker's back, as shown in fig. 1.11.
6. Tighten the screws attaching the anti-tilt bracket.
7. Push the cooker against the wall so that the anti-tilt bracket is fully
inserted in the sloton the cooker's back.
Attention!
When sliding the cooker into place pay special attention not to trap the
powersupply cable in the stability bracket.
Pay special attention to the gas connection hose.
Fig. 1.11
13
Advertisement
Table of Contents
