Table of Contents
Advertisement
Oven fitting out
Fit the catalytic panel to the side rack
* Ensure the panels are placed the correct way around (with the arrow up fig.
6.6): the cutout fits over the light and the hole for the fixing screw goes to
the front of the oven.
* Assemble the wire racks to the oven walls using the 2 screws (fig. 6.6).
* Slide in, on the guides, the shelf and the tray (fig. 6.7).
The shelf must be fitted so that the safety notch, which stops it sliding out,
faces the inside of the oven; the guard rail shall be at the back.
* To dismantle, operate in reverse order.
HOLE FOR SIDE LIGHT
Guard rail
Fig. 6.6
59
Stop notch
Fig. 6.7
Advertisement
Table of Contents
