Table of Contents
Advertisement
Important:
DO NOT use chlorine-based or acid-based cleaning products, abrasive
products or non-neutral detergents as they may cause irreparable
damage to the surface. DO NOT spray cleaning liquids directly on the
programmer display.
Gas taps
Do not let cleaning products come into contact with the valves.
Periodic lubrication of the gas taps must be carried out by specialist
personnel only. In the event of operating faults in the gas taps, call the
Service Department.
Inside of oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm
water. Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturers recommendations and testing a small
sample of the oven cavity. Abrasive cleaning agents or scouring pads/
cloths should not be used on the cavity surface.
Note
The manufacturers of this appliance will accept no responsibility for
damage caused by chemical or abrasive cleaning.
Let the oven cool down and pay special attention no to touch the hot
heating elements inside the oven cavity.
Burners
These parts must be cleaned using a sponge and soapy water or other
suitable non-abrasive products. Dry with a soft cloth.
56
Advertisement
Table of Contents
