Table of Contents
Advertisement
To fix the sliding shelf supports onto the side racks:
* Screw the side racks onto the oven wall (and the catalytic liners if supplied
- fig. 6.6).
* Fit the sliding shelf supports onto the top wire of a rack and press (fig. 6.12a).
You will hear a click as the safety locks clip over the wire.
Important note:
When cooking with the rotisserie DO NOT position the grill tray on the
sliding shelf supports.
To remove the telescopic sliding shelf supports:
* Remove the side racks (and the catalytic liners if supplied) by unscrewing
the fixing screws (fig. 6.6).
* Lay down the sliding shelf support and side racks, with the telescopic
sliding shelf support underneath.
* Find the safety locks. These are the tabs that clip over the wire of the side
rack (arrow "1" in fig. 6.12b).
* Pull the safety locks away from the wire to release the wire (arrow "2" in fig.
6.12b).
Cleaning the sliding shelf supports:
* Wipe the supports with a damp cloth and a mild detergent only.
* Do not wash them in the dishwasher, immerse them in soapy water, or use
oven cleaner on them.
Fig. 6.12a
1
2
Fig. 6.12b
63
1
Fig. 4.3
Advertisement
Table of Contents
