Figure 21 Host Interface Ports (Eternus Af650 S3); Table 17 Status And Meaning Of Each Led (Host Interface For The Eternus Af650 S3) - Fujitsu ETERNUS AF S3 Series Basic Operation Manual

A. Component Names
Controller Enclosure
●
ETERNUS AF650 S3
There are four types of host interfaces: FC 32Gbit/s, FC 16Gbit/s, and iSCSI 10Gbit/s (10GBASE-SR/10GBASE-
CR).
Figure 21
CA FAULT LED
CA READY LED
FC 2 ports
iSCSI 10Gbit/s (10GBASE-SR)
Port#0 Port#1
iSCSI 10Gbit/s (10GBASE-CR)
(for Copper Twinax cable connection)
Port#0 Port#1
The states of LEDs are listed below.
Table 17 Status and Meaning of Each LED (Host Interface for the ETERNUS AF650 S3)
LED name
CA FAULT
CA READY
LINK/FAULT
Host Interface Ports (ETERNUS AF650 S3)
FC 4 ports
LINK/FAULT LED
Port#0 Port#1
LINK/FAULT LED
LED status
(amber)
(green)
(green)
(amber)
LINK/FAULT LED
Port#2 Port#3
Meaning
The host interface is in error status.
The host interface is in normal status.
The link between the host interface port and the destination
port has been established.
The host interface port is in error status.
80 Operation Guide (Basic)