Fujitsu ETERNUS AF S3 Series Basic Operation Manual page 40

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
Sixth screw
(M5 screw)
First screw
(M5 screw)
Fifth screw
(M5 screw)
Second screw
(M5 screw)
(3)
Tighten the M4 screws of the rack rails that were slightly unscrewed in
(4)
Install the drive enclosure in the rack.
(5)
Fasten the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack pillar.
Front view of drive enclosure
[Left]
2U
Bottom position of
drive enclosure
Rack rail
Rear view of drive enclosure
[Left]
2U
Bottom position of
drive enclosure
Rack rail
• When installing or removing the drive enclosure to or from the rack,
make sure that the sides and the bottom of the drive enclosure are
held by two or more people. Failure to do so may cause injury.
M5 screws
[Right]
Sixth screw
(M5 screw)
First screw
(M5 screw)
[Right]
Fifth screw
(M5 screw)
Second screw
(M5 screw)
M5 screws
40
Step (1).
Operation Guide (Basic)