Figure 15 2.5" Drives; Table 11 Status And Meaning Of Each Led (Drive) - Fujitsu ETERNUS AF S3 Series Basic Operation Manual

A. Component Names
Controller Enclosure
LED name
MAINTENANCE
CACHE
READY
REMOTE
■
Drives
2.5" drives have LEDs.
Figure 15 2.5" Drives
2.5" drive
DRIVE READY LED
DRIVE FAULT LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 11 Status and Meaning of Each LED (Drive)
LED name
DRIVE READY
DRIVE FAULT
■
Controllers
The controller contains a CPU, system memory, Battery Backup Unit (BBU), host interfaces, drive interface (DI)
ports, and LAN ports. The controller controls all operations in the ETERNUS AF.
LED status
(green)
(blinks green)
(green)
(green)
(green)
LED status Meaning
The drive is in normal status.
(green)
(blinks green)
•
(amber)
•
73
Meaning
Maintenance for the ETERNUS AF is in progress.
Maintenance (from ETERNUS Web GUI or ETERNUS CLI) for the
ETERNUS AF is in progress or a status check of the ETERNUS AF is
necessary.
There is data in the cache memory of the ETERNUS AF.
The ETERNUS AF is available for use.
The ETERNUS AF is turned on and off with the server.
The drive is in error status.
The LED light up operation was performed from the ETERNUS CLI
command line in order to identify the drive location.
Operation Guide (Basic)