Error Handling - Epson Perfection V10 Service Manual

EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo

1.6 Error Handling

Error type
Command error Received an undefined command or undefined command
parameter.
Fatal error
The main unit is faulty (The lamp is dead. The Carriage does
not return to its home position).
The cover was opened while scanning is in progress.
The document cover was not removed when scanning strip
films. * 1
The AFL is jammed with strip films.*
Note *1: Perfection V100 Photo/Perfection V200 Photo/Perfection V350 Photo
*2: Perfection V350 Photo
PRODUCT DESCRIPTION
Table 1-6. Error Definition and Remedy List
Cause
• No LED indication occurs.
• The scanner ignores the incorrect command or
parameter (Current setting maintained).
• The scanner returns NACK and waits for the next
command parameter.
• The red LED flashes.
2
Error Handling
Scanner Action
The scanner recovers from the error by receiving
a correct command.
Turn the scanner off and then back on.
Close the cover.
After removing the cover mat, send the
initialization command (ESC @).
After removing the jammed films manually or by
pressing the EJECT button, send the initialization
command (ESC @).
Revision B
Recovery
16