Lamp Assy - Epson Perfection V10 Service Manual

EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo
4. Remove the screw (C.B.P. 3x8, 5-7 kgf.cm.) that secures the AFL Inverter Board.
5. Disconnect CN2 connector, and remove the AFL Inverter Board.
6. Disengage the two hooks, and remove the AFL Inverter Board Cover from the
AFL Lower Housing.
AFL Inverter
Cover
AFL Inverter Board
Hook
Figure 4-39. Removing the AFL Inverter Board (2)
DISASSEMBLY/ASSEMBLY

4.5.4 Lamp Assy

1. Separate the AFL Upper Housing Assy/AFL Lower Housing Assy.
(4.5.1 Separation of AFL Upper Housing Assy/AFL Lower Housing Assy on page
46)
2. Disconnect CN2 connector from the AFL Inverter Board.
(Figure 4-38 on page 48 )
3. Remove the two screws (C.B.P. 3x8, 5-7 kgf.cm.) that secure the Lamp Assy.
4. Lift up the Lamp Assy from the screws attached side to release the two tabs from
the slit of the AFL Lower Housing, and remove the Lamp Assy.
CN2
C.B.P. 3x8
Disassembly of AFL
Slit and Tab
Lamp Assy
Lamp Assy
CN2
Figure 4-40. Removing the Lamp Assy
Revision B
C.B.P. 3x8
49