Overview; Precautions; Recommended Tools; Screws - Epson Perfection V10 Service Manual

EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo

4.1 Overview

This chapter explains the procedures for disassembling the major units and parts of the
product. Unless otherwise explained, reassembly should be carried out in the reverse
order of the disassembly procedure. When you have to remove any units or
components that are not described in this chapter, refer to the exploded diagram in the
Appendix.
Before starting disassembly, always read the precautions described in the next section.

4.1.1 Precautions

Before starting the disassembly or reassembly of the product, always read the
following precautions given under the headings "WARNING" and "CAUTION".
Before disassembling or reassembling this product, always
W A R N I N G
disconnect the Power Cable and Interface Cable. However,
when you have to work with power ON for voltage
measurement, etc., use extreme care not to get an electric shock
and do the work in accordance with the procedure given in this
manual.
To prevent your hands from being cut by sharp edges, always
wear gloves before starting disassembly/reassembly.
When touching any internal components, use a static electricity
discharger such as anti-static wrist straps, and handle them
carefully to protect the microprocessors and circuits.
Provide sufficient work space for disassembling and
C A U T I O N
reassembling.
Always use only the recommended tools for disassembly,
reassembly and adjustment.
Use the specified grease for lubrication. (Refer to Chapter 6
MAINTENANCE(P.58)
When using compressed air products; such as air duster, for
cleaning during repair and maintenance, the use of such
products containing flammable gas is prohibited.
DISASSEMBLY/ASSEMBLY
for details.)

4.1.2 Recommended Tools

To protect this product from damage, use the specified tools indicated in the following
table
Table 4-1. Recommended Tools
Tool Name
Phillips screwdriver No. 2
Flat-blade screwdriver
Tweezers

4.1.3 Screws

The following table indicate the screws used in the EPSON Perfection V10/V100 Photo/
V200 Photo/V350 Photo.
Table 4-2. Abbreviations of Screws
Abbreviation
C.B.S
C.B.P
C.C.P
No.
1
2
3
Overview
Supplier Part Number
EPSON 1080532
EPSON 1080527
EPSON 1080561
Part Name
Phillips Bind S-tite Screw
Phillips Bind P-tite Screw
Phillips Cup P-tite Screw
Table 4-3. Used Screw List
Standard
C.B.S 3x5
C.B.P 3x8
C.C.P. 3x8
Revision B
Outline
31