Film Holder Lock - Epson Perfection V10 Service Manual

EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo
3. Insert the two guide pins of the AFL Upper Housing into the
positioning holes of the Damper, and screw the Damper.
Damper
Guide pin and
positioning hole
Figure 4-49. Reassembling the Damper/Film Holder
DISASSEMBLY/ASSEMBLY
Film Holder
AFL Upper Housing
Disassembly of AFL

4.5.9 Film Holder Lock

1. Remove the Damper/Film Holder.
2. Disengage the two hooks that secure the Film Holder Lock with a flat-blade
screwdriver, and push out the Film Holder toward the outside of the AFL Upper
Housing.
Hook
Film Holder Lock
Figure 4-50. Removing the Film Holder Lock
Revision B
(4.5.8 Damper/Film Holder on page 53)
54