Scanner Problems; Checking Error Messages On The Control Panel; The Scanner Does Not Turn On - Epson DS-730 User Manual

Solving Problems

Scanner Problems

Checking Error Messages on the Control Panel

If an error message is displayed on the control panel, follow the on-screen instructions or the solutions below to
solve the problem.
Note:
See the following if an error message is displayed when scanning to a network folder.
"Messages are Displayed on the Control Panel when Scanning to a Network Folder" on page 192
Messages
Computer not found. For details, see your documentation.
Scanner error. For details, see your documentation.
RECOVERY MODE
Related Information
"Updating Applications and Firmware" on page 183
&
"Installing Your Applications" on page 203
&

The Scanner Does Not Turn On

❏ Make sure the AC adapter is securely connected to the scanner and an electrical outlet.
❏ Check that the electrical outlet is working. Plug another device into the electrical outlet and check that you can
turn the power on.
> >

Scanner Problems

The Scanner Does Not Turn On
❏ Make sure the scanner is connected to your computer
properly.
❏ Install Epson Scan 2 and Document Capture Pro/
Document Capture on your computer.
❏ Install the latest version of the application.
❏ Make sure the AC adapter is securely connected to the
scanner and an electrical outlet.
Check that the electrical outlet is working. Plug another
device into the electrical outlet and check that you can
turn the power on.
❏ Check the firewall settings for Epson software.
❏ Set the same group for the scanner and the computer.
❏ Search for the computer again.
Turn the power off and on again. If the error continues to
occur, contact your local dealer.
The scanner has started in recovery mode because the
firmware update failed. Follow the steps below to try to
update the firmware again.
1. Connect the computer and the scanner with a USB cable.
2. Visit your local Epson website for further instructions.
186
Solutions