User instructions
Factory Reset
Use this option only if you have to start the complete installation
procedure from scratch.
If you continue from here, all your previous settings and all channels
will be cleared !
The default data will be loaded.
If you press OK button, it asks for your confirmation.
If you want to reset, press OK button, or press EXIT button to exit this
menu.
USALS Setup
You can input the Longitude and Latitude.
If you select USALS as the switch type from the Dishsetup menu, enter the
value of USALS setup menu.
1.- Longitude:
Press the NUMERIC button and enter the Longitude.
When the OK button is pressed, it can be toggled East/West.
2.- Latitude:
Press the NUMERIC button and enter the Latitude.
When the OK button is pressed, it can be toggled North/South.
Press EXIT button to save.
46
"Common Interface"