Table of Contents
Advertisement
11. Tools
When you press Menu key to enter menu, there will
display the picture like below:
11.1. Information
When you enter to "Information" menu, you will see a
screen like above . The screen displays the followings
information:
- HW Version
- SW Version
- Date
Press Exit key to draw back from "Tools" menu .
11.2. Factory Setting
This menu allows you to delete all channels and return the
receiver to the initial state (factory default) .
When you press OK key in the "Factory Setting" item:
1 .
It will display a message for digit the password .
2 .
It will show a warning message to inquiry you
"The operation will load default and erase all the
channels that user added, continue?" .
3 .
If you select "Yes" option, the all revised parameters
of the receiver will reset to default value . Please
carefully to using this function .
In step 1 and step 2, select "No" or press Exit key can
4 .
draw back from this item and without saving .
5 .
After factory default, the receiver displays the initial
installation .
6 .
First steps .
11.3. Othello
1 .
Moving highlight to "Setup" and press
select the game level (degree of difficulty) .
Moving highlight to "Start" and press OK key to start
2 .
the game .
Moving highlight to [Cancel] keys and press OK key
3 .
to draw back from the game .
4 .
Start on the game:
•
/
/
— Use these keys to guide chessman
•
OK — Set chessman
•
Exit — Quit game
23
EN
/
keys to
Advertisement
Table of Contents
