Cam (Conditional Access Module) And Smart Card; Tv With Terrestrial Antenna; Tv With Motorized System (Diseqc 1.2) - Televes Common Interface 7254 User Instructions

User instructions

CAM (Conditional Access Module) and Smart Card

CAUTION
- Please do not plug in the main power supply cord until you have finished all of the connections!
- If you want to enjoy watching scrambled broadcasting channels, you need to purchase the CAMs and smart cards from a
service provider's sales department.
- However, broadcasting channels from multiple service providers call for multiple CAMs and Smart cards.
- STB which who have only the CAMs and smart cards provided by the one service provider can show several broadcasting
channels of the provider. Please refer to manuals provided by service providers for details because the CAM and smart
cards are featured with unique menus, apart from menus given by STB.
- Watching "Free-To-Air" channel is available regardless of the CAM and smart cards.
- As service providers download new information to smart cards if necessary, those who have CAMs and smart cards should
always put the smart cards in proper slots.

TV with Terrestrial Antenna

1.- Connect one end of RF cable to the TV OUT on the back of the
STB and the other end to a RF input jack on your TV.
2.- Connect one end of RF cable to the ANT IN on the back of the STB
and the other end to a terrestrial antenna connection or the jack for
the public antenna on the wall.
3.- Finally connect the coaxial cable from the LNB to the LNB IN jack
on back of the STB.
Receiver with Motorized System (USALS)
1.- Connect one end of RF cable to the TV OUT on the back of the
STB and the other end to a RF input jack on your TV.
2.- Connect one end of your coaxial cable to the LNB IN connector on
the STB and the other end to the REC or Receiver connector on
the USALS motor ref. 7518.
3.- Connect the coaxial cable from the LNB to the LNB connector on
the USALS motor ref. 7518.
CAM
Smartcard
37
"Common Interface"