User instructions
"Common Interface"
Change PIN Code
From here you can change the PIN code from the standard 0000.
DO NOT FORGET IT! Without it, you are not able to access to any of the
functions where the code is required.
1.- Input the New PIN code using NUMERIC button on the remote control.
2.- To verify the new PIN code, re-enter a new PIN code in the highlighted
confirm PIN code.
Note!!: If you forget the PIN code, press the RGYB (Color) button in
sequence.
(i.e. RED-> GREEN-> YELLOW-> BLUE button)
The PIN code will be changed to '0000'.
50