Connecting Your Equipment; How To Connect Your Stb To Various Systems - Televes Common Interface 7254 User Instructions

User instructions

Connecting Your Equipment

How to connect your STB to various systems

1.- Connect STB to a TV set
Connect your STB to a TV set with
SCART, if your TV set is equipped
for it.Alternatively you can use A/V,
TV out (UHF) or S/Video jacks.
2.- Connect STB to a VCR
Connect the SCART jack from the
VCR to the back
STB.Alternatively you can use A/V,
TV out (UHF) or S/Video jacks.
Satellite reception
DO NOT PLUG THE
RECEIVER INTO THE
MAINS, until all the
cables have been
correctly connected.
3.- Connect STB to a Hi-Fi System
Connect a RCA stereo cable from
the AUDIO L/R jacks, S/PDIF on
your STB to the LINE,AUX, SPARE
or EXTRA input jacks on your Hi-Fi
System.
4.- Connect STB to a Digital Audio
System
of your
If you have a DAC with S/PDIF
coaxial cable input, you can connect
the STB with it to enjoyhigher quality
sound. Connect S/PDIF coaxial
cable to a digital amplifier.
TV
5.- Loop Through
If you have another analogue or
digital STB and you wish to use the
same LNB then you canconnect it
via the loop through. Connect one
end of the coaxial cable to the Loop
Through onthe STB and connect the
other end to the LNB IN on your
second STB.
Terrestrial reception
RSD-7254
(Recommended)
VCR
36
"Common Interface"
Note:
- All of the cables
that are used in
connection to the
Receiver are
shielded.
- The output channel
of the Digital
Receiver is by
default Ch. 21.