Aerial Adjustment; System Configuration Information; Factory Defaults - Televes 7287 User Manual

User manual
9.5.- Adjustment of the Aerial
The Adaptor is provided with a signal test to help you to adjust your aerial
perfectly.
- Press the MENU button to activate the main menu. Select the option
"Antenna Adjustment" in the "Settings" menu using the buttons P+/P-
and press the OK button to confirm.
- Using the V+/V- buttons, select a digital channel. You will see that the
bars indicating Sound and Quality levels will start to display the current
signal values.
- Now adjust your aerial until you achieve the maximum signal level on
both bars. To help you in making this adjustment, it will be
accompanied by a beep that varies in frequency according to signal
intensity.
9.6.- Information on System Configuration
This function will enable you to view the software and hardware versions of
the Adaptor.
- Select the option "System Configuration" On the Settings menu using
the P+/P- buttons, and press OK to confirm.
- Press the EXIT button to return to the Settings menu, or press the
MENU button to return to the normal mode.
9.7.- Factory Settings
If you wish to reset the equipment to the factory setting, you can do this at
any time. Likewise you can eliminate the program list if it is incorrect, and
carry out a new search.
- Select the option "Factory Settings" On the Settings menu using the
P+/P- buttons, and press OK to confirm.
- The "Factory Dafault" sub-menu will then appear.
Restore Factory Settings:
- This function will enable you to return to the parameters the adaptor
had on leaving the plant, overriding any later configuration it might
have been given.
- Select the option "Restore Factory Settings", using the P+/P- buttons,
and press OK to confirm. A message will then appear requesting either
confirmation (YES) to continue with the operation, or authorization (NO)
to cancel it.
Delete All Programas:
- This function enables you to erase all the programs that have been
memorized.
- Select the option "Delete All Programs" by using the P+/P- buttons,
and press OK to confirm. A message will then appear requesting either
confirmation (YES) to continue with the operation, or authorization (NO)
to cancel it.
48
"DTR-7287"