Reference; Diseqc 1.0 Connection; Diseqc 1.2/ Usals - Televes Common Interface 7254 User Instructions

User instructions

Reference

DiSEqC 1.0 Connection

• All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
• This allows multiple antennas to be connected to the STB at the same time.
• If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1.0 switch (ref. 7268 & 7269).
• Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.
• Do the same for any other LNBs that you have.
• Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch, connect the other end to the LNB IN
socket on the STB.

DiSEqC 1.2/ USALS

• To the digital receiver, you can connect either a single satellite antenna directly or LNB of multi-feed equipment. When
installing the USALS (ref. 7518) please consult the reference manual for proper operation.
38
"Common Interface"