Menu Guide; Main Menu; Installation - Televes Common Interface 7254 User Instructions

User instructions

Menu Guide

Main Menu

Press the MENU button on the remotecontrol unit.
You will see the "Main Menu" on the screen.
1.- You can move into the desired submenu using UP/DOWN buttons.
2.- You should enter the PIN code in order to move into the corresponding
submenu in case of "Installation" or "User Preference".
The factory default pin is "0000"
3.- Press OK button to confirm your selection.
4.- Press the MENU button to return to previous menu.
Or press the EXIT button to quit the Menu system completely.
Main Menu shows the following information.

Installation:

Set Antenna Setup, Automatic Search, Manual Search, Factory Reset, and
USALS setup.
User Preference:
Shows Channel Properties, Edit Channel List, Uninstall Satellite, Program
Guide, and Change PIN Code.
System Setup:
Set Local Time, Menu Language, Audio Language, Subtitle Language,
SCART Output, S/PDIF Output, RF Channel, RF Mode, System
Information, Screen Type, Menu Transparency, Banner Time, Parental Lock,
Receiver Lock, Menu Lock and Auto Power.
CA System:
Shows scrambled channels by using common interface modules.
Installation
In this menu, you can set up antenna and scan satellite or transponder.
You can also use the factory reset function.
To use this menu, enter the submenu you want using the UP/DOWN buttons
after inputting a PIN code.
41
"Common Interface"