Edit Channel List - Televes Common Interface 7254 User Instructions

User instructions

Edit Channel List

You can Lock, Delete, Move, or Rename Channels.
You have to input a PIN code before using this menu. The factory default is
"0000".
Lock
You can lock channels in any of the list to prevent your children from
watching.
1.- Select "LOCK" at the left side in the Edit Channel List.
2.- Select the channel you want to lock at the right side using UP/DOWN
buttons and press OK button.
Then, mark will be marked at the selected channel.
Press OK once again to cancel.
3.- To confirm the channel list, press the MENU button or EXIT button. The
request window will be displayed on the screen. Press OK button to
save or EXIT button to exit this menu.
Note!! : Repeat the procedure for each channel you want to lock. When you
lock a channel in any list, the channel will be locked automatically in
all other lists.
Delete
You can delete TV or Radio channel from the current list.
1.- Select "Delete" at the left side in the Edit Channel List.
2.- Select the channel you want to delete at the right side using UP/DOWN
buttons and press OK button.
Then, the channel to delete will turn into red.
If you press OK once again, the selected channel will be cancelled.
3.- To confirm the channel list, press the Menu button or EXIT button. The
request window will be displayed on the screen. Press OK button to
save or EXIT button to exit this menu.
Move
You can change the position of the channel you want on the channel
lists.
1.- Select "Move" at the left side in the Edit Channel List.
2.- Select the channel you want to move at the right side and press the OK
button.
3.- Move the channel you want to the desired position using the UP/DOWN
buttons.
Then the channel starts moving
4.- Press OK button. The position of the channel will be moved.
Rename
You can rename the channel.
1. Select "Rename" at the left side in the Edit Channel List.
2. Select the channel at the right side you want to rename and press OK
button.
Then a keypad screen will appear.
3.- Select the desired character using the UP/DOWN buttons and press OK
button. Then the selected character will be imprinted on the keypad.
To cancel the selected character, press the GREEN button.
4.- Select all of selected characters and press the RED button.
Then the name of channel will change.
48
"Common Interface"