Dexter Laundry B Series Operators Manual Installation & Operation Instructions page 20

INDICATOR LIGHTS (L.E.D.s)
Cycle (1 through 5)
Heating Elements
Programming
Stop
SWITCHES (Pushbuttons)
Up/Increase
Down/Decrease
Program
Select/Enter
8514-265-001 REV C PAGE 20
TOUCH PAD DESCRIPTION
Description
These L.E.D.s are on solid when a particular cycle is chosen
for operation or programming.
This L.E.D. is part of the 4-digit numeric display and will be
on solid during the drying part of a cycle when the heating
elements do not need to be on. The L.E.D. will be blinking
when the heating elements need to be on. The L.E.D. will
not be on solid or blinking (off) if the cycle is stopped,
complete, in cool down, or terminated.
These L.E.D.s are on solid as they are selected during the
programming of the dryer controller.
This L.E.D. is on solid when either the STOP button is
pressed once or the door is opened during an operating
cycle.
This touch pad switch will increment (increase) dry time,
cool down time, and drying temperature. It will also scroll
upwards when selecting a dry cycle.
This touch pad switch will decrement (decrease) dry time,
cool down time and drying temperature. It will also scroll
downwards when selecting a dry cycle.
This touch pad switch allows the dryer controller to enter the
permanent programming mode.
This touch pad switch will select one of the three variable
parts of the dry cycle (dry time, temperature, or cool down)
by sequencing through them. Once one of the variable parts
of the dry cycle is chosen and changed, this touch pad
switch will enter the new (changed) value into the dry
cycle program.
Description