Dexter Laundry B Series Operators Manual Installation & Operation Instructions page 25

shown on the 4-digit numeric display and allow you to start the temporary dry cycle. If you start the temporary
dry cycle, the 4-digit numerical display will change to the total dry time and count down to 0 as the dry cycle
progresses.
1) Make sure the dryer is not in a dry cycle. The 4-digit numeric display on the dryer controller will show
"LOAd" when the dryer is not in a dry cycle.
2) Press and release the UP or DOWN arrow keys on the dryer controller touch pad to chose the dry cycle that
you want to change (dry cycle 1 through 5). The dry cycle L.E.D. will illuminate to indicate which dry cycle
you are choosing. If you press either arrow key and hold it down, the controller will sequence through the
five dry cycles.
3) Press and release the CYCLE key on the dryer controller touch pad once you have chosen the dry cycle you
want to change. After you press this key, the programming L.E.D. and the dry time L.E.D. will illuminate.
The dry cycle L.E.D. will remain illuminated. The total dry time will also be displayed on the 4-digit numeric
display.
4) Press and release the UP or DOWN arrow keys to change the total cycle time. Once either of the arrow
keys is pressed, the dry time L.E.D. and the total dry time on the 4-digit numeric display will flash. If you
press and hold either arrow key down, you will increment (UP arrow) or decrement (DOWN arrow) through
the total dry times available (1 through 60 minutes). This displayed dry time includes the cool down time
along with the heated time. To not change the total dry time, do not press the arrow keys to change the
total dry time.
5) Press and release the SELECT/ENTER key. Once this key is pressed and released, the dry time L.E.D. will
switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, and the temperature L.E.D. will
illuminate. The drying temperature will also be shown on the 4-digit numeric display.
6) Press and release the UP or DOWN arrow keys to change the drying temperature. Each press and release
of the arrow keys will either increase or decrease the temperature by five degrees Fahrenheit or three
degrees Celsius, depending on how your dryer controller is set up. Once either of the arrow keys is pressed,
the temperature L.E.D. and the drying temperature on the 4-digit numeric display will flash. If you press and
hold either arrow key down, you will increment (UP arrow) or decrement (DOWN arrow) your way through
the available drying temperatures (105
you do not want to change the drying temperature, do not press the arrow keys. Go to the next step.
7) Press and release the SELECT/ENTER key. Once this key is pressed and released, the temperature L.E.D.
will switch off, the dry cycle L.E.D. and programming L.E.D. will remain on, and the cool down L.E.D. will
illuminate. The cool down time will also be shown on the 4-digit numeric display.
8) Press and release the UP or DOWN arrow keys to change the cool down time. Once either of the arrow keys
is pressed, the cool down L.E.D. and the cool down time on the 4-digit numeric display will flash. If you
press and hold either arrow key down, you will increment (UP arrow) or decrement (DOWN arrow) through
the cool down times available (2 through 60 minutes). To not change the cool down time, do not press the
arrow keys. Go to the next step.
9) Press and release the SELECT/ENTER key. Once this key is pressed and released, the cool down L.E.D. and
the programming L.E.D. will switch off, and the dry cycle L.E.D. will remain on. The flashing cool down time
on the 4-digit display will stop flashing and remain.
10) At this point, you have two choices. 1) You can perform the modified dry cycle by pressing and releasing the
START key on the dryer controller touch pad, or 2) You can clear the modified dry cycle program by pressing
and releasing the STOP key once. If you start the modified cycle, the total dry time will appear on the 4-
digit numeric display and it will count down to 0 as the dry cycle progresses. If you choose to clear the
modified dry cycle, the 4-digit numeric display will change to "LOAd".
8514-265-001 REV C PAGE 25
PROCEDURE
º º
Fahrenheit or 40 Celsius, up to 195
º º
Fahrenheit or 91 Celsius). If