Dexter Laundry B Series Operators Manual Installation & Operation Instructions page 29

11) Press and release the STOP touch pad key. The dry time L.E.D. will remain on and the programming
L.E.D. will switch off. The dryer controller display will change to the word "LOAd".
The dryer is now ready for the new modified dry cycle to start. This modified dry cycle 1 program will remain
in the dryer controller memory until the default settings push button is pressed. This default settings push button
is located on the component side of the dryer controller printed circuit board at the middle center side of each
circuit board controls.
8514-265-001 REV C PAGE 29