SWITCHES (Pushbuttons) - continued
Cycle
Stop
Start
8514-265-001 REV C PAGE 21
This touch pad switch allows the dryer controller to enter the
temporary programming mode.
This touch pad switch will stop the dryer during a dry cycle
without clearing the present drying cycle if pressed once. If
pressed and released twice, consecutively, the present dry
cycle will be cleared.
This touch pad switch will start the operation of a dry cycle if
pressed and released once. Pressing and holding this touch
pad switch will display the current temperature of the dryer
heat sensor as long as it is held in the depressed position.
Description