Fixure Information; Fixture Settings - ProLights Chromatrix User Manual

22
3.13 FIXTURE INFORMATION
1. Press the MENU button to enter the main menu and scroll using UP/DOWN button to select Information,
and then press ENTER button.
2. Use UP/DOWN button to select: Auto Test - Fixture Hours - Version - IP Address - Device ID.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Auto Test
This setting starts the products test sequence. Select Auto Test.
Fixture Hours
This option shows the user the amount of hours the CHROMAPIX has been in use throughout its life-
time. Select Fixture Hours.
Version
This option shows the user the software version currently installed in the unit. Select Version.
IP Address
Displays the product's IP address. Go to IP Address and press ENTER button.
Device ID
Displays the product's ID number. Go to Device ID and press ENTER button.

3.14 FIXTURE SETTINGS

It is possible to change the parameter value in the following way:
Dimmer
This setting determines the output of the CHROMAPIX based on the position of the Red, Green, Blue,
White and Dimmer faders.
• Press the button MENU repeatedly until Dimmer Mode shows, and press ENTER button to accept.
• Use the button UP/DOWN to select a dimmer curve (Off - DIM1 - DIM2 - DIM3).
• Press ENTER button to accept.
• Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
Back Light
• To activate backlight display press the button MENU so many times until shows Back Light, and press
the button ENTER to confirm.
• Press the button UP/DOWN to select On - 10S - 20S - 30S. Press ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
Temperature
• This option allows the user to view the product's internal temperature. Press the button MENU so
many times until shows Temperature, and press the button ENTER to confirm.
CHROMAPIX