Ethernet Setting - ProLights Chromatrix User Manual

Fan Setup
This setting determines the output of the CHROMAPIX based on the position of the Red, Green, Blue,
White and Dimmer faders.
• Press the button MENU repeatedly until Fan Setup shows, and press ENTER button to confirm.
• Use the button UP/DOWN to select a setting (Auto/High).
• When in Auto, the fan speed automatically changes so the fixture's temperature does not exceed the
limit. When in High, the fan speed follow the max predefine values.
White balance
Enter the White balance to adjust the Red, Green, and Blue parameter to make different whites.
• Press the button MENU so many times until shows White Balance, and press the button ENTER to
confirm.
• Select red, green or blue (Red, Green, and Blue), through the buttons UP/DOWN.
• Press ENTER button to confirm.
• Set the value (125-255), through the buttons UP/DOWN.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.

3.15 ETHERNET SETTING

This setting allows you to choose a particular Ethernet protocol setting.
1. Press the MENU button to enter the main menu and scroll using UP/DOWN button to select Ethernet
Setting, and then press ENTER button.
2. Use UP/DOWN button to select: Protocol - IP Mode - Net - Subnet - Universe - Start Channel - ArtNet To Dmx.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Protocol
In Protocol select KlingNet - ArtNet, through the buttons UP/DOWN. Press ENTER button to confirm the
selection.
IP Mode
In IP Mode select Static - DHCP - Manual, through the buttons UP/DOWN. Press ENTER button to confirm
the selection.
Net
Select Net and press ENTER button to set the desired value (0-127) through the buttons UP/DOWN.
Subnet
Select Subnet and press ENTER button to set the desired value (0-15) through the buttons UP/DOWN.
Universe
Select Universe and press ENTER button to set the desired value (0-15) through the buttons UP/DOWN.
Start Channel
Select Start Channel and press ENTER button to set the desired value (1-512) through the buttons UP/
DOWN.
ArtNet To Dmx
Select ArtNet To Dmx to convert Artnet protocol into DMX. Press ENTER button and select Yes or NO.
CHROMAPIX
23