Planning and preinstallation
sys secconfig command
sys secconfig provides access to the secconfig command, which existed in previous
releases. The following is an example of this command:
[admin@server4950csa ~]$ sys secconfig --hhelp
This script is used to manage run-time security settings on this appliance.
The following command-line arguments are available:
--help, -h
Prints terse help (command line syntax).
--hhelp, -hh
Prints verbose help (this help).
--sshCBC < --enable | --disable | --query >
-cbc
< -e
Enables, disables, and queries the current state of SSH daemon
CBC-based ciphers.
[admin@server4950csa ~]$
sys versions command
The sys versions command provides a summary of key system layer information, including the
type of appliance (OVA), the version number of the system layer, the version of the current
partitioning, and the OVA that was originally deployed.
[admin@server4889csa ~]$ sys versions
Appliance type
System layer version : 3.4.0.0.2
Partitioning version : 2.0
Original OVA deploy
[admin@server4889csa ~]$
sys volmgt command
Syntax help: sys volmgt --help
The sys volmgt command is used to query and extend disk volumes on the system. The
following provides the command line syntax for this command:
[admin@server4889csa ~]$ sys volmgt --help
Syntax:
--help,
--hhelp,
--version,
--status,
--summary,
--monitor
[tail|less],
--logs,
October 2018
| -d
| -q >
: AAWG
: csa-3.3.0.0.365
-h
-hh
-v
-st
-s
-m [tail|less]
-l
Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
®
Web Gateway
30