Battery-Charging Generator; Battery-Charging Generator Drive - Drive Belt Check And Adjustment - MTU 8V2000M40A Operating Instructions Manual

7.19 Battery-Charging Generator

7.19.1 Battery-charging generator drive – Drive belt check and adjustment
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Assembly device
Preparatory steps
1. Remove limit switch (4).
2. Remove indicator (1).
3. Remove screws (3) of protective cover (2).
4. Remove protective cover.
5. Check drive belt condition (→ Page 212).
Belt drive – Checking distance
1. Measure distance (A) with assembly device.
2. If measured value of distance (A) is not within
the tolerance of 98 mm ± 1.5 mm, readjust
belt tension.
MS150031/06E 2016-010 | Battery-Charging Generator | 213
Part No. Qty.
F6559691 1