MTU 8V2000M40A Operating Instructions Manual page 153

Diaphragm – Check
1. Remove cover (4).
2. Remove spring (5), gasket (2) and dia-
phragm (3).
3. Check diaphragm (3) for damage, fit new dia-
phragm if used one is damaged.
4. Install diaphragm (3) on housing (1).
5. Install new gasket (2) and spring (5) together
with cover (4).
6. Use torque wrench to tighten screws of cover (4) to specified tightening torque.
Name
Screw
7. Check diaphragm in other oil separators in the same way.
Size Type
Tightening torque
MS150031/06E 2016-010 | Crankcase Breather | 153
Lubricant Value/Standard
(Engine oil) 10 Nm −2 Nm