MTU 8V2000M40A Operating Instructions Manual page 125

Fault Alarm text
code
170 MI MODULE FAIL
171 MI NOT ACTIVE
173 MODULE WRITE
LIMIT
180 CAN1 NODE LOST At least one device not detect-
181 CAN2 NODE LOST At least one device not detect-
182 CAN WRONG PA-
RAMETERS
183 CAN NO PU-DATA Error during loading of CAN
184 CAN PU-DATA EE-
FAIL
185 CAN LESS MAIL-
BOXES
186 CAN1 BUS OFF
187 CAN1 ERROR PAS-
SIVE
188 CAN2 BUS OFF
189 CAN2 ERROR PAS-
SIVE
201 SD T-COOLANT
202 SD T-FUEL
203 SD T-CHARGE AIR Sensor defect (charge-air tem-
205 SD T-COOLANT
INTERC.
208 SD P-CHARGE AIR Sensor defect (charge-air pres-
211 SD P-LUBE OIL
216 SD T-LUBE OIL
220 SD COOLANT LEV-
EL
Meaning
Module in maintenance predic-
tor either defective or missing
Maintenance predictor no more
activated
EEPROM write limit reached
ed on Default CAN bus
ed on Redundant CAN bus
Consistency error in CAN pa-
rameters
project design data into ECU.
Error during project design da-
ta download in EEPROMs
Error during CAN initialization.
Severe fault on Default CAN
bus;
automatic change-over to Re-
dundant CAN bus
Light fault on Default CAN bus
(e.g.shortage overload)
Severe fault on Redundant CAN
bus;
automatic change-over to De-
fault CAN bus
Light fault on Redundant CAN
bus (e.g.short-time overload)
Sensor defect (coolant temper-
ature)
Sensor defect (Fuel tempera-
ture)
perature)
Sensor defect (charge-air cool-
ant temperature)
sure)
Sensor defect (lube oil pres-
sure)
Sensor defect (lube oil temper-
ature)
Sensor defect (coolant level)
MS150031/06E 2016-010 | Troubleshooting | 125
Task
Contact Service.
Contact Service.
Contact Service.
1. Check wiring (CAN bus).
2. Contact Service.
1. Check wiring (CAN bus).
2. Contact Service.
Contact Service.
Contact Service.
Contact Service.
Contact Service.
Contact Service.
(none)
Contact Service.
(none)
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.
1. Check wiring.
2. Contact Service.