Table of Contents
Advertisement
CHAPTER 7
LASER SENTINEL SETUP AND
CONFIGURATION
This chapter is dedicated to the Laser Sentinel setup and configuration using the DLSen-
tinel software. The aim of this chapter is to guide the user through all the fundamental
procedures of configuring the device.
To employ the safety laser scanner, a safety configuration must be created on DLSenti-
nel, where the user is required to enter all the parameters, configure inputs and outputs
and create monitored areas.
For further information about DLSentinel, refer to the DLSentinel User's Manual.
INSTALLING DLSENTINEL GUI
The DLSentinel client application software needs to be installed on your PC to configure
the safety laser scanner.
Minimum System Requirements
To ensure proper interfacing with the system, the personal computer must meet the fol-
lowing minimum requirements:
Processor(s)
Clock frequency
RAM
Free hard drive space
Monitor resolution
Supporting Operation System
Besides the components listed in the table above, your PC must be equipped with the
following hardware and software drivers:
•
•
52
SAFERY LASER SCANNER
COMPONENT
Installed Ethernet network card and installed driver
One free 100 Mbps Ethernet port
RECOMMENDED
Pentium 4
>= 3 GHz
2 GB
70 MB
1280x768
Windows XP
Windows 7
Windows 8
Windows 10
MINIMUM
Pentium 4
>= 2 GHz
1 GB
70 MB
1024x768
Advertisement
Table of Contents
