Table of Contents
Advertisement
PROTECTION BRACKET MOUNTING (SLS-BRACKET-C)
(OPTIONAL)
The protection bracket is an optional accessory, which provides protection to the device
if it is located in a specific work environment where the device may be hit by falling
objects or subject to collision.
Fasten the Protection Bracket (1) on the back of the Laser Sentinel, by using two M5
screws (2) (Maximum 2.9-3.1 Nm Torque).
NOTE
PROTECTION BRACKET MOUNTING (SLS-BRACKET-C) (OPTIONAL)
The SLS-BRACKET-C must be mounted on the device before the other fas-
tening accessories.
Figure 2 - Protection Bracket Mounting
Figure 3 - Protection Bracket Mounted to Scanner
29
INSTRUCTION MANUAL
Advertisement
Table of Contents
