Table of Contents
Advertisement
UPS5000-S-600 kVA
User Manual (Three-phase, Three-wire)
Figure 3-10 Dimensions of antiseismic kit mounting holes (unit: mm)
Step 2 Drill holes for installing expansion bolts, and install expansion sleeve.
Step 3 Open the front door of the cabinet and remove the support baffle plates from the front of the
cabinet. Remove the rear cover.
Figure 3-11 Removing support baffle plates
Step 4 Secure the antiseismic kits to the front and back of the cabinet using M6 screws.
Figure 3-12 Securing the antiseismic kits to the cabinet
Issue 05 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
3 Installation
62
Advertisement
Table of Contents
