Table of Contents
Advertisement
UPS5000-S-600 kVA
User Manual (Three-phase, Three-wire)
Issue 05 (2019-12-20)
Figure 4-89 RCCMD execute
RCCMD TRAP: When the event happens, the MDU will send the TRAP message to all
connected RCCMD clients based on the sending mechanism.
If you want to define the TRAP message by yourself, you can use the TRAP signal to
display the UPS information. For example, if you enter #INVOLT V, the RCCMD client
will receive the UPS input voltage value (for example, single-phase: 220 V; three-phase
A: 220 V, B: 220 V, C: 220 V).
Figure 4-90 RCCMD TRAP
Copyright © Huawei Technologies Co., Ltd.
Table 4-13
lists the signal names that can be entered.
4 User Interface
153
Advertisement
Table of Contents
