Power Module - Huawei UPS5000-S-600 User Manual

UPS5000-S-600 kVA
User Manual (Three-phase, Three-wire)

2.3.3 Power Module

Appearance
Figure 2-10 Power module
(1) Positioning lock
(5) Ready switch
Table 2-2 Indicator description
Indicator
Run indicator
Issue 05 (2019-12-20)
(2) Run indicator
(6) Output port
Color Status
Green Steady on
Blinking at
long intervals
Blinking at
short intervals
Copyright © Huawei Technologies Co., Ltd.
(3) Alarm indicator
(7) Input port
Description
The system is working in inverter mode.
 The inverter is ready and in standby state
(blinking at 0.5 Hz, on for 1s and off for
1s).

The inverter is not started (blinking at 0.2
Hz, on for 2.5s and off for 2.5s).
The module is not configured, the inverter or
rectifier DSP software is being upgraded, or
the inverter CPLD software is being upgraded
(blinking at 4 Hz, on for 0.125s and off for
0.125s).
2 Overview
(4) Fault indicator
24