Multiple M9381A Pxie Vsgs In A Chassis - Keysight Technologies M9391A PXIe Startup Manual

M9381A Cable and Module Table

Multiple M9381A PXIe VSGs in a Chassis

Up to four M9381A PXIe VSGs can be installed in a single M9018/M9019A 18-slot
PXIe Chassis, sharing a single embedded controller, as shown here. These PXIe
VSGs share one M9300A PXIe Frequency Reference and can be time-synchronized
with backplane triggering to generate test stimulus for multi-channel receivers and
MIMO devices. The PXIe VSGs can also be configured to be phase coherent with
Option 012 and cabling all channels to use a single M9301A PXIe Synthesizer
module with Y1243A cable kit.
Keysight M9391A PXIe Signal Analyzer & M9381A PXIe Vector Signal Generator 1 MHz to 3 GHz or 6 GHz
Part Number Connection
8120-5091 M9300A 100 MHz Out 1 to M9301A 100
MHz In
8120-5091 M9301A 100 MHz Out to M9310A 100 MHz
In
8120-5091 M9310A 100 MHz Out to M9311A 100 MHz
In
8120-5091 M9310A Trig 1 to M9311A Trig 1 for Pulse
Modulation
W1312-20266 M9301A RF/LO Out 1A to M9311A LO In
W1312-20267 M9311A RF Out to M9310A RF In
8121-2063 This cable can be used to direct an External
Reference into the M9300A Ref In
connector.
1250-2316 M9310A RF Out connector saver
8121-2175 M9311A Trig 2 to M9214A Trig 1 *
*The 8121-2175 cable is not required for standard M9381A operation. It is
useful for power amplifier (PA) testing with the M9391A. This cable improves
repeatability by enabling you to consistently measure the same portion of the
input signal.
Cable Description
Cable, coaxial, SMB (female)-SMB
(female)
Cable, coaxial, SMB (female)-SMB
(female)
Cable, coaxial, SMB (female)-SMB
(female)
Cable, coaxial, SMB (female)-SMB
(female)
Cable, semi-rigid, SMA (male) - SMA
(male)
Cable, semi-rigid, SMA (male) - SMA
(male)
Cable, coaxial, BNC (male) - SMB (female),
1200 mm
Adaptor, coaxial, straight SMA (male) -
SMA (female)
Cable, coaxial, SMB (female)-SMB
(female) 300 mm
32